Our Dump Truck Tarps are made of a high quality, tough PVC coated mesh.
A standard Dump Truck Tarp comes with a folded, webbing reinforced hem on two sides, a spline on the front end, and a vinyl reinforced pocket on the back end of the tarp.
Grommets on the sides is an option that can be added.
The pocket on the remaining end is reinforced with 18 oz. Vinyl inside, and strategically placed webbing.
This product has been improved over time based on Driver feedback to make a Trison Tarps Dump Truck Tarp the best option for a new or replacement tarp for a dump truck tarp system.
Our tarps are compatible with virtually all makes/models of dump truck tarps systems available in the USA.
If you are looking for a heavy duty dump truck tarp in the USA you’re in the right place!
How to measure for a Dump Truck Tarp:
Tips:
84″ is the standard width that fits the majority of dump truck tarp systems.
For a 96″ box width, ordering an 84″ wide tarp is recommended.
For a 102″ box width, ordering a 90″ wide tarp is recommended.
WIDTH: If the standard widths aren’t the right fit, measure the roller bar from flange to flange and take off 4″ so the tarp can sit 2″ inside the flange on each side.
LENGTH: Measure from where the roller bar is, to the back of the box being covered and add 2 feet.
This ensures that the tarp is 2 feet longer than the box being covered and will fit heaped loads.
Our dump truck tarps are well suited for dump trucks hauling sand, gravel, rock, construction debris, salt, or many other applications where load containment without waterproofing is required.
David (verified owner) –
Only issue was that where it connects to the roller the edge of the tarp was doubled with gromets and would slide into the original groove. Had to secure to roller with screw and fender washers.
Fredy Gomez (verified owner) –