Showing all 5 results
Dump truck tarp systems play a vital role in ensuring the safety of the driver and other road users. They are designed to cover the load, protecting it from the elements and preventing debris from falling off the truck during transportation.
Dump truck tarp systems come in a variety of types and options, including electric, manual, flush mount, underbody, straight arm, bent arm, and high mount.
Electric dump truck tarp systems are powered by a motor, which makes it easy to operate the tarp with the push of a button.
Manual dump truck tarp systems require the driver to manually operate the tarp, using a crank or handle.
The types of options you can expect to choose from are:
Check out the options below for more details and do not hesitate to contact us if you have any questions at all!
Give us a call!
Electric dump truck tarp systems are an essential component of any dump truck, helping to keep the load secure and protected from the elements during transportation.
See All Electric Dump Truck Tarp Systems
The 5000 Series is a front-to-rear tarp system that comes with direct-drive motor options.
The system features zinc-plated steel tubing, low-profile flat-coil torsion springs, and 1 1/4-inch square steel tubes with bent pivot arm extensions.
The tarp options include heavy-duty mesh, multicolored PVC mesh, 18-oz. vinyl, and asphalt lumite. There are additional options for side flaps, reinforced pockets or hems, webbing, boxed corners, stenciling, grommets, and D-rings.
Donovan Hammer II™
The Hammer™ II is a one-size-fits-all solution for dump bodies up to 23 feet. It features 1 1/2-inch diameter round “easy-off” pivot arms and flat coil torsion springs that provide smooth, powerful operation.
The system is available in two models, the GL model with a ground-level manual crank, and the standard Hammer™ with the Durabuilt™ 12V direct-drive motor with a rotary switch.
Additionally, there are optional upgrades available, including a 40-amp Durabuilt™ rocker switch kit with solenoid, wind deflectors, pivot arm rests, and spring trap and tarp trap hold-downs.
The Flash is a dump body covering system that features an exclusive stamped-steel spring enclosure, a two-part stamping process that eliminates welds, and a heavy-duty Grade 8 spring pin.
The system also has thick-walled pivot arms, a high-polish zinc protective coating, and a Durabuilt 12V direct-drive electric motor with an in-cab rotary switch.
It comes with optional upgrades such as wind deflectors and tarp trap hold-downs.
The Bullet is an electric tarp system designed to cover boxes up to 23 feet long. It comes with either straight or 30° angled arms of anodized aluminum that will never rust.
The tarp moves smoothly on an extruded aluminum roller bar, powered by the Durabuilt™ 12V direct-drive electric motor with rotary switch.
Optional upgrades include 40-amp Durabuilt™ rocker switch kit with solenoid, wind deflectors, pivot arm rests and spring trap and tarp trap hold-downs.
Donovan has designed the Arm-Matic™, a tarp system that is dependable and durable for hauling various materials such as gravel, coal, scrap metal, and rock.
The system is designed to minimize downtime and is easy to use and repair. It includes features such as a tarp spool with side plates, a galvanized steel crossover bar, and aluminum high-gloss pivot arms.
Additionally, the system includes a Durabuilt™ motor with a 3-year warranty, a rocker switch, and is high mount compatible for up to 23′.
Roll Rite Tarpmaster 300/400/500
The 300 model is designed for single axle trucks with boxes up to 12 feet in length. It features a TarpMaster® 97″ tarp spool with wind deflector, a 3-spring external mount pivot set, and a standard tarp bow.
The 400 model is designed for tandem trucks with boxes up to 18 feet in length. It features a TarpMaster® 97″ Tarp Spool with wind deflector, a 4-spring external mount pivot set, and a standard tarp bow.
The 500 model is designed for multi-axle trucks with boxes up to 22 feet in length. It features a TarpMaster® 97″ tarp spool with wind deflector, a 5-spring external mount pivot set, and a tarp bow.
Aero Easy Cover – 10 Spring
The Aero Easy Cover is a tarp system designed for dump applications that features powerful springs and durable arms made of aluminum alloy.
The system is available in both electric and manual versions, and the electric motor comes with a chrome cover and a 3-year warranty.
Optional wireless controls are available, allowing the operator to view the tarp system from outside the truck cab. The Easy Cover is the most cost-effective and easy-to-use front-to-back system for dump applications.
The AeroForce F2B system offers customized solutions for trucks of all sizes, from 13′ dump bodies to 53′ trailers, with 3 pivot arm sizes and spring configurations.
The compression spring reduces fatigue and tension loss, ensuring safe and secure transportation of even the heaviest loads.
The all-aluminum arm construction protects the spring from environmental elements and is 8x stronger than the competition, with strong extrusions and corner castings.
Aero Easy Cover – Twin 280
The Twin 280 is an aluminum system designed for dump bodies and trailers up to 25′ long.
It features Series Springs that offer several benefits, including optimal tension on the tailgate in the high mount position and the ability to mount the spring system high or low on the dump body.
The Series Springs also provide torque for 280° of rotation and prevent lifting and bouncing in the covered position.
Manual dump truck tarp systems are an affordable and reliable solution for securing and protecting loads during transportation. These systems are operated by hand, using a crank or handle to roll the tarp over the load.
See All Manual Dump Truck Tarp Systems
Roll Rite ALC DB Series: DB-11, DB-11SS, DB-20
The ALC-DB Series is a collection of heavy-duty steel or stainless steel tarp systems that feature Hydra-Lock tarp arms and operate from the truck’s central hydraulics.
There are electric-over-hydraulic pump and controls option available.
The tarp systems are designed for municipal and construction dump truck applications.
The DB-11 model is a heavy-duty steel pivot with a powder-coated 3/8″ laser-cut steel arch and formed pivot mounts with Teflon-lined steel spherical bearings.
The hydraulic arms have a 45-degree pivot arm tubing, and the pivot cylinders are corrosion-resistant.
The DB-11 also includes a 4-1/2″ extruded aluminum torsion tube assembly and comes with a 2-year warranty (excluding the tarp).
The DB-11SS is a durable tarp system designed for single axle dump bodies up to 11 feet. It features a heavy-duty stainless steel pivot arch, with 304 stainless steel 3/8″ laser cut arch and formed pivot mounts with 1/2″ Teflon-lined steel spherical bearings.
The hydraulic arms are made of stainless steel and can lower and lock down on top of the truck body.
The tarp spool assembly is made of 4-1/2″ extruded aluminum torsion tube assembly, and comes with a 3-year warranty (excluding tarp).
The DB-20 is a hydraulic arm system designed to fit multi-axle dump bodies up to 20 feet long. It features a heavy-duty steel pivot with a powder-coated 3/8″ laser cut steel arch, formed pivot mounts with Teflon-lined steel spherical bearings, and UHMW self-lubricating guide blocks.
The hydraulic arms are powder-coated and feature 45-degree pivot arm tubing, corrosion-resistant pivot cylinders with a 1-3/4″ bore and 17″ stroke, and a 2-1/2″ x 1-1/2″ x 11 gauge construction.
The system also includes a 4-1/2″ extruded aluminum torsion tube assembly and comes with a 2-year warranty (excluding tarp).
Hammer™ II (GL model)
The Hammer™ II GL model is a dump body with a one-size-fits-all styling for bodies up to 23 feet.
The GL model offers a ground-level manual crank and a choice of heavy-duty mesh, multicolored PVC mesh, 18-oz. vinyl or asphalt lumite.
It is equipped with strong pivot arms and flat coil torsion springs for smooth operation.
Manual dump truck tarp systems are generally more affordable, with prices ranging from $700 to $1200, while electric dump truck tarp systems are more expensive, with prices ranging from $1400 to $2200 or more.