3 Pc. Lumber Tarp – Ends: 24′ x 18′ (8′ Drop); Mid: 24′ x 19′ – 16oz

A Set of 3 Lumber Tarps is made up of 2 pcs 24’ x 18’ Lumber Tarp with End Flap (8’ Drop) for the End Tarps (one for the front of the load, one for the rear of the load), and 1 pc 24’ x 19’ with D-ring Rows on all 4 Sides for the Center Section.

Each 24’ x 18’ Lumber Tarp with End Flap (8’ Drop) has 3 rows of D-Rings on the 27 foot sides and an 8 foot by 10 foot End Flap, perfect for tarping 8’ high loads (and lower). One tarp would be for the front of the load, and the other for the rear of the load.

The Center Section tarp is 24’ x 19’ with D-ring Rows on all 4 Sides. It has 3 rows of D-Rings on each of the 19 foot sides, and 2 rows of D-Rings on each of the 24 foot sides.

This set of 3 is a complete set for tarping a 48’ Flatbed Trailer.

Since most of the time a load on a 53’ trailer would only be about 52’ long, this set would also be suitable as a Set of 3 Lumber Tarps for a 53’ Trailer. 

If you are tarping a 53’ trailer and you know the load will be 53’ long (from the front of the deck to the rear), then you could consider custom ordering a Center Section that is 24’ x 20’ with D-Rings on all 4 sides. 

Trison Lumber Tarps are made with the highest quality materials including:

Fabric: Trison Advantage 16oz vinyl coated fabric (Waterproof).  Our 16oz vinyl is just as durable as 18oz, but you get a tarp that is 11% lighter.

Seams: All seams are heat sealed so the vinyl stays waterproof (no stitching holes).

Edge Hems: All edge hems of the tarps are folded over 2” and 2” seatbelt webbing is tucked inside to ensure strong hems and a good seating for the grommets.

Grommets: We use the industry’s toughest stainless steel grommets instead of brass grommets that often corrode when tarps are stored when wet. This ensures you always have a grommet tie down when needed.

D-Rings: We use 2” Nickel plated steel D-Rings – this large size ensures that a bungee or rubber strap tie down can easily pass through the D-Ring, hook and all. 

All D-rings are sewn on with a tough, wear resistant 2” seatbelt web loop.

D-Ring Rows: We use tough, wear resistant 2” seatbelt for all D-rings – the strongest webbing in the industry. 

Branding: We can accommodate a vast array of logos, so you can put your lumber tarps to work, advertising your company as you drive down the road. There is usually a nominal, one time only, fee to create the logo in the right format, and then you only pay for the logo installation each time after that.

Cold Crack: Our Trison Advantage Vinyl is rated for minus 40 degree (Celsius and Fahrenheit) cold crack. We often get feedback from customers who will only use our tarps because of how they are still manageable even in extreme cold temperatures.

Colors Available: Black Tarps are in stock. Red, Blue, and Green are available as custom orders with a lead time of 2 weeks.